ATEC

Products
+
  • 图片1.png
  • 17.png

Thermal vacuum test chamber

Advanced heat sink temperature control mode is adopted, with excellent temperature uniformity and conductivity, reaching the advanced European standard

Details

Advanced heat sink temperature control mode is adopted, with excellent temperature uniformity and conductivity, reaching the advanced European standard

Limit vacuum: 1 × 10-5pa (normal temperature, no load)

Working vacuum: better than 5 × 10-4Pa (normal temperature, full load 100kg aluminum)

The pressure change rate (normal temperature, full load 100kg aluminum) is controllable and adjustable throughout the whole process

From atmospheric pressure to 3000pa, the average rate shall not be less than 10KPA / min

From 3000pa to 10Pa, the average speed shall not be less than 200Pa / min

From atmospheric pressure to 5 × 10-3pa, time not more than 40min

Rapid depressurization: from atmospheric pressure to 10KPA, the time shall not be greater than 1.5min

Load: About 100kg aluminum

Previous

Next

Previous

Next

Other Products

Multi axis rotation test chamber

Temperature range:

-55 ℃ 100 ℃

Cooling rate:

Thermal vacuum test chamber

Temperature range:

Cooling rate:

Compound salt spray test chamber

Temperature range:

-20 ℃ ~ 60 ℃ controllable

Cooling rate:

Rain test chamber

Temperature range:

Cooling rate:

Sand and dust test chamber

Temperature range:

Cooling rate:

New energy test chamber

Lithium battery and fuel cell

Temperature range:

-50 ℃ ~ 120 ℃

Cooling rate:

1~5 ℃/min (optional)

I want to consult

Submission