ATEC

Solution

25 ℃ linear high and low temperature rapid temperature change (damp heat) test chamber

2021-06-02

The linear average of mechanical refrigeration under thermal load requirements reaches 25 degrees

Rapid temperature change three comprehensive test chamber (damp heat, with vertical vibration table)

2021-08-11

Temperature range:-70 ℃ ~ +150 ℃ temperature uniformity: ≤ 2 ℃ temperature fluctuation: ≤ 0.5 ℃ temperature deviation: ≤ 2 ℃ temperature rise/drop rate: (fast change temperature range:-55 ℃ ~ 125 ℃) linear rise/drop rate: ≥ 5 ℃/min, load 1T aluminum block, 10kw heating nonlinear rise/drop rate: ≥ 5 ℃/min, load 1.8T aluminum block, 23kw heating no-load rise/drop average temperature change rate: ≥ 15 ℃/min humidity range: 15% to 98% r. h.

Walk-in compound salt spray test chamber (stainless steel box)

2021-08-10

Walk-in composite salt spray box, meeting GJB150.11A-2009 military equipment laboratory environmental test methods part 11: salt spray test; GB/T10125-1997 artificial atmosphere corrosion test salt spray test and other internal volume: 40m ³ internal dimension: 5000mm × 4000mm × 2000mm (depth, width and height) temperature range:-20 ℃ ~ +60 ℃ controllable humidity range: 10% ~ 98% r. h. salt spray settlement: salt spray settlement can be adjusted from 1 ml/h to 3ml/80c ㎡ h to meet GJB15
< 1 > proceed page