Hello, welcome to Chongqing ATEC Technology Co., Ltd. official website!
ATEC
Products
High and low temperature damp heat test chamber
Classification:
Series：
SU Series
Temperature Range:：
150 ℃ ~ -40 ℃ or -70 ℃
Cooling Rate：
1 ℃/min or 3 ℃/min
Details
In order to pursue better quality and more stringent reliability guarantee, ATEC has independently developed the whole series of the test chamber and formed standardization since 2006. Continuous improvement and absorption of advanced technology have formed "ch" and "Su" series to meet the needs of different customers.
This series of products are equipped with volume models such as 250L, 400L, 600L to 2000L. In terms of design, environmental protection refrigerant and high-performance refrigeration system are adopted. The main parts are international well-known brands and unique humidification system, providing a variety of humidity range options.
Temperature range: 150 ℃ ~ - 40 ℃
150℃~ -70℃
Cooling rate: 1 ℃ / min or 3 ℃ / min
Model description
Ch: Product Series No. 250: Studio volume (unit: l)
T: Single temperature, without humidity, no "t" indicates with humidity
C: Indicates the minimum temperature
C: Minimum - 70 ℃; None: minimum - 40 ℃; E: Minimum - 20 ℃
Technical parameter
| 型号(SU) | 100（C） | 160（C） | 250（C） | 400（C） | 600（C） | 1000（C） | 1600（C） | 2000（C） |
|---|---|---|---|---|---|---|---|---|
| Nominal internal volume (L) | 100L | 160L | 250L | 400L | 600L | 1000L | 1600L | 2000L |
| Performance | ||||||||
| Temperature range（T/TC） | (-40℃/-60℃)~+120℃ | -40℃~+150℃/ -70℃~ +150℃ | ||||||
| Humidity range | Ch series: 20% ~ 98% RH (humidity working range + 20 ℃ ~ + 85 ℃) Su series: 10% ~ 98% RH (humidity working range + 20 ℃ ~ + 90 ℃) | |||||||
| Temperature fluctuation | ±0.3℃ | |||||||
| Temperature deviation | ±2℃ | |||||||
| Humidity deviation | -3 ~ + 2% RH (above 75% RH), ± 5% RH (below 75% RH) | |||||||
| Heating rate (whole process average) | CH series: 2 ℃ / min Su series: 3 ℃ / min | |||||||
| Cooling rate (whole process average) | CH series: 1 ℃ / min Su series: 2 ℃ / min | |||||||
| Remarks | The above indexes are measured under no-load and ambient temperature of 20 ± 2 ℃, in which the temperature rise and fall rate is measured at ± 85 / - 30 ℃ and + 85 / - 55 ℃ | |||||||
| Internal dimensions（mm） | ||||||||
| D | 400 | 500 | 580 | 700 | 750 | 1000 | 1250 | 1400 |
| W | 500 | 560 | 600 | 700 | 850 | 1000 | 1000 | 1200 |
| H | 500 | 600 | 740 | 850 | 900 | 1000 | 1200 | 1200 |
| External dimension (mm) | ||||||||
| D | 1260 | 1530 | 1655 | 1725 | 1850 | 2080 | 2250 | 2450 |
| W | 750 | 810 | 850 | 950 | 1100 | 1250 | 1250 | 1450 |
| H（Including casters） | 1765 | 1840 | 1820 | 1885 | 2000 | 2105 | 2300 | 2300 |
| Casters | 4 standard casters | |||||||
| Observation window | 450x450 with heating device to prevent condensation and frosting | |||||||
| Test hole | 1 × 50, right side of box | 1 × 80, right side of box | 2 × 100, one on the left and right sides of the box | |||||
| Stainless steel shelf (2 pieces as standard) | Bearing capacity: 25kg / piece | Bearing capacity: 50kg / piece | ||||||
| lighting | 35W/12V | 2*35W/12V | ||||||
| Cooling mode | Air cooling | |||||||
| Power Supply | 380V±10%/50HZ±1，Three phase five wire system (3P + N + G) | |||||||
| Installed capacity（kw）（T/TC） | 3.6/4.4 | 4.5/5.6 | 5.2/7.4 | 6.0/8.5 | 8.0/11 | 9.0/14 | 11/16 | 13/17 |
| Meet the test method | GB2423.1、GB2423.2、GJB150.3、GJB150.4、GB11158、GB10589 | |||||||
| Safety protection measures | Power supply undervoltage, overvoltage, phase loss and phase sequence error protection; Triple overtemperature protection; Heater short circuit protection; Refrigerator overpressure / overload protection; Overload / overheating protection of blower motor; Control board overcurrent protection; Leakage protection. | |||||||
| Optional | Recorder, special test hole, special shelf, timing function, water cooling mode, Internet function, etc | |||||||
Next
Next
Other Products
High and low temperature damp heat test chamber
CH Series
Temperature range:
150 ℃ ~ -40 ℃ or -70 ℃
Cooling rate:
1 ℃/min or 3 ℃/min
High and low temperature damp heat test chamber
SU Series
Temperature range:
150 ℃ ~ -40 ℃ or -70 ℃
Cooling rate:
1 ℃/min or 3 ℃/min
Rapid temperature change test chamber
Temperature range:
-70 ° ℃ ~ 150 ° ℃
Cooling rate:
5 ℃ ~ 25 ℃ / min (mechanical refrigeration)
Temperature shock test chamber
Hatchback Basket
Temperature range:
-65 ℃ ~ 150 ℃
Cooling rate:
H type is about 4 ℃ / min, M type is about 3 ℃ / min, L type is about 2 ℃ / min (- no-load average value in the range of 55 ° C
Temperature shock test chamber2
Three-compartment
Temperature range:
-65 ℃ ~ 150 ℃
Cooling rate:
H type is about 4 ℃ / min, M type is about 3 ℃ / min, L type is about 2 ℃ / min (- no-load average value in the range of 55 ° C
Temperature and humidity vibration three comprehensive test chamber
Three comprehensive test box
Temperature range:
-70 ℃ ~ 150 ℃
Cooling rate:
1 ℃ - 5 ℃ / min optional (no load, whole process average. - 40 - + 100 ℃)
I want to consult
HELLO！
Thank you for entering the official website of ATEC. If you have cooperation intention or suggestions, you can contact us through the following ways, and we will contact you as soon as possible. Thank you!
Address：No. 9, Airport Industrial Park, Yubei District, Chongqing, China.
Market Consultation Tel：+86-023-67180600
After-Sale Service Hotline：+86-023-67180169
After-Sale Service Fax：+86-023-67180019
Official Mobile Edition
Official Public Number
©Copyright of 2023 Chongqing ATEC Technology Co., Ltd. All Rights Reserved. 
渝公网安备50011202502453号